Shop

41%2B50N3My8L. SS80  - Universal 8.5mm Tough Aluminium Alloy Tent Pole Section with Ferrule Camping Repair
2x Ground Stake / Spike for Telescopic Pole
October 5, 2017
51ia%2BH%2BmLfL. SS80  - Universal 8.5mm Tough Aluminium Alloy Tent Pole Section with Ferrule Camping Repair
Outwell Oakland XL Red Coded Durawrap Duratec Fibreglass Front Tent Pole Run
October 5, 2017

Universal 8.5mm Tough Aluminium Alloy Tent Pole Section with Ferrule Camping Repair

6.50£

Constructed from lightweight yet tough 7005 aluminium alloy which measures 8.5mm in diameter and 60cm in length, 64cm including the male ferrule.
Ideal as a replacement if you have broken a pole section, you can easily replace the old section but you may need to cut them down to the required length with a junior hacksaw.
To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.

Usually dispatched within 24 hours

Constructed from lightweight yet tough 7005 aluminium alloy which measures 8.5mm in diameter and 60cm in length, 64cm including the male ferrule. Ideal as a replacement if you have broken a pole section, you can easily replace the old section but you may need to cut them down to the required length with a junior hacksaw.

Usage: To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.

Specifications
Brand:
Universal
Material: Tough 7005 aluminium alloy
Diameter: 8.5mm
Length: 64cm (including ferrule)
Colour: Silver

How do I Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off).
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.

Cut the new section to same length as damaged section using a hacksaw.

Reassemble poles as follows:
• Replace broken section with new section.
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.
Constructed from lightweight yet tough 7005 aluminium alloy which measures 8.5mm in diameter and 60cm in length, 64cm including the male ferrule.
Ideal as a replacement if you have broken a pole section, you can easily replace the old section but you may need to cut them down to the required length with a junior hacksaw.
To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.